Thank You For Viewing This Page.
Please be patient as pictures appear!!!

 PAINTS    

and 

COATINGS

                                      

 

Industrial and Government Surplus + Closeouts and Specialty Productions.

---

 YOU SHOULD FIND WHAT YOU NEED AT A GOOD PRICE  $$$.

At this point in time .. I  am concentrating on 100% solids polymer epoxy resin floor coatings which are far better than anything I have ever seen and are actually cheaper per square foot than thinned down inferior products! I have an arrangements with several manufacturers that assures me a fresh and abundant supply of product!!  But I still Buy and Sell Surplus Product!!!

---

Small OR LARGE QUANTITIES!!!

---

Here is what is currently available

2 Part  = 2 to 1 Mix

WHILE SLIGHTLY MORE EXPENSIVE PER GALLON THAN SOLVENT OR WATER BASED PRODUCTS =  (when not on sale!!!) .. IT COVERS UP TO 3 TIMES THE AREA AS THOSE CHEAPER RETAIL PRODUCTS.

Actually Less $$$ per square foot!!!! 

$.21 TO $.99 PER SQUARE FOOT
(depending on thickness and quantity purchased)

ON SALE ABOUT $70.00 PER GALLON IN VOLUME

 !!! SALES TAX IS APPLIED TO ORDERS SHIPPED TO NEW JERSEY!  

IF YOU LAY DOWN 12 MILS = IT DRIES AT 12 MILS..  

  Many so called Epoxies are only 35% Solids!!!  

  They would dry about 3-5 Mils.  

  Supposed Top of the line products may approach only 70% solid 

Most retail products will give you a 4 to 6 Mils in two coats.  

MY PRODUCTS CAN DO 30 MILS IN ONE COAT OR MORE!!!

 You avoid the fumes and hazards of solvent based paint ..covers much more area.. MUCH SAFER ..   

No need to turn off Pilot lights !!

Last Much Longer!!!

     STRONGER THAN CONCRETE..  

Approx. 6 Hour Cure Time..

Quicker Turnaround Time = Use floor same day!!

MIX ONLY WHAT YOU WILL PUT DOWN IN 1/2 HOUR AT 70 DEGREES

 Do your borders and outlines first with a small batch and pour out and apply the rest within 6 hours =   It will all blend in and " self level".  

ONLY ONE COAT REQUIRED

SELF LEVELING = FILLS IN MODERATE CRACKS AND POX MARKS

Covers 100 to 400 Square Feet per gallon.

 CURES AT 40 DEGREES 

I LIKE TO FIGURE 150 SQUARE FEET PER GALLON = A NICE 12 MILS COVERAGE.

Thicker = Only Better !!!

You can get a 3 GALLON package = One  3 1/2 Capacity Pail with 2 color Gallons in it + 1 gallon of hardener to be mixed 2 to 1 ratio in the bigger  container... $225.00

A 3 GALLON KIT = $225.00 AND COVERS ABOUT  600 SQ. FT. (AT 8 MILS)

***********************************

A 15 GALLON KIT

(2) 5 GALLON CANS OF COLOR +( 1) 5 GALLON CAN OF HARDENER

IS $1,050.00

COVERS 3,000 SQ. FT AT 8 MILS THICKNESS

 55 GALLON DRUMS AND TANKER CARS ARE ALSO AVAILABLE AT REDUCED $$$$$ (150 GALLON KITS) 

 !!! SALES TAX IS APPLIED TO ORDERS SHIPPED TO NEW YORK STATE !!!  

Regularly about = $300.00++ PER  3 GALLON Kit ...below are actual samples of the product. Competitors are running much much higher for similar 100% solids product..

WHITE IS REFLECTING RED FROM COLA CAN

 FAR SUPERIOR TO RETAIL PAINT STORE PRODUCTS.

 BELOW IS LIGHT GRAY = VERY POPULAR..

COLOR CHIPS CAN BE ADDED = BUT REQUIRE A CLEAR TOP COAT.

 COLOR CHIP SAMPLE CHART = click here 

  INDUSTRIAL STRENGTH = FORK LIFTS GLIDE RIGHT OVER IT!!  

 Battery Acid, Brake Fluid and Fuels are "childsplay!!"

MEDIUM GRAY

  

This is the Dark Gray applied fairly heavy. (20+ mils)

BATTERY ACID AND BRAKE FLUID ARE CHILD'S PLAY!!

THIS IS A NICE TAN!!!

OUR NEW BLUE!!!

OUR TILE RED!!!

  CLEAR COAT FOR PRIMER AND/OR TOPCOAT!!!  

   ALL THE ABOVE COLORS ARE GENERALLY IN STOCK = READY TO SHIP.  

This is a safety container for acid storage using tile red 100% solids..

This is super stuff!! Contact me for prices on other colors or mixes.. 

We have 3 Quart,  3 gallon and 15 gallon Kits.

CHEAPER IN LARGER QUANTITIES...

55 GALLON DRUMS AND TANKER LOADS ARE AVAILABLE !!!

3 QUART KIT = $75  .. COVERS 75 TO 300 SQUARE FEET

3 GALLON KIT (below) = $225 .. COVERS 300 TO 1200 SQ. FT.   

15 GALLON KIT = $1,050.00 .. COVERS 1500 TO 6000 SQ. FT.

 COVERAGE BASED ON 4 MILS MINIMUM .. TO A FULL 16 MILS THICKNESS.

I LIKE TO FIGURE 150 SQ. FT. PER GALLON = A NICE SINGLE 12 MILS COATING.

MANY COATS CAN BE APPLIED WITHIN 6 TO 24 HOURS TO BUILD TO YOUR LIKING.
 

 This product is far superior to SOLVENT OR WATER BASED  retail outlet products  like  Home Depot, Sears, Lowe's, S/W etc.. 

My Prices beat everyone I have ever checked = tell me if you find cheaper!!! Remember = this is 100% solids 2 to 1 mix.. the best!!!

GREAT on cement , concrete or brick.. Actually sticks to about any surface better than other products..

 

I have arranged with Several  Manufacturers to purchase surplus product from overruns and off color batches at a reduced price. Customized production orders can be arranged .. Just need some lead time !!!. About 20% more on custom colors..

  Also GOOD ON metal plastics wood marine boats garage roof floor wall walls cellar basement patio indoor wall outdoor patios tools equipment tool shop pole barn repair shop fiberglass fibreglass sheds shed aluminum tin plastic pool patio..

 DRIES LIKE SHINY VINYL TILE.. 

 Yet has a "grip"... 

A full line of accessory products is available..

Naturally, the better you prepare the surface = the better these products will stand up.. however, two coats of this over poor prep will still last for many years!!!

 EPOXY POLYMER RESIN 2 PART COATING 

 

I PRETTY MUCH CAN GET YOU ANY KIND OF PAINT OR COATINGS AND ACCESSORY ITEMS YOU NEED AT A GOOD PRICE = JUST CONTACT ME!! BUDGETBOBSWEBMAIL@YAHOO.COM

 Below are charts and helpful links 

 COLOR CHIP SAMPLE CHART 

 ANTI-SLIP ADDITIVE COVERS 200 SQ. FT. PER 1/2 POUND COST =$ 10 00.  IT IS ADDED TO THE LAST COAT BY SPRINKLING. 

 SURFACE PREPARATION INFORMATION 

 100% SOLIDS EPOXY PAINT APPROXIMATE COVERAGE TABLE  

                         (THICKNESS OF COVERAGE)
  AMOUNT               4 MILS     8MILS     12MILS     16MILS         COST      $ PER SQ. FT.

  ONE GALLON       400sq.ft   200           150             100           $75.00        .18 TO .75

3 QUART KIT         300           150           112              75             $75.00       .25TO .99

  3 GALLON KIT     1200           600           450             300          $225.00      .18 TO .75

   15 GALLON KIT   6000          3000         2250           1500      $1,050.00      .17 TO .71

  COST to COVER an AREA NICELY 8 to 16 MILS  

  150 SQ. FT. = 10X15 , 20X7+,   30X5 = $75 TO $150  TOTAL

  500 SQ. FT.  = 10X50 , 20X25,  30X16to17,   40X12+ ,  50X10 = $225 TO $450 TOTAL

  1000 SQ. FT.  = 10X100,  20X50,  30X33,  40X25  = $450  TO $900

  3000 SQ. FT.  = 10X300,  20X150,  30X100,  40X75,  50X60  = $1,050 TO $2,100

  4 MILS = ABOUT WHAT YOU GET FROM 2 COATS OF SOLVENT OR WATER BASED PAINT (35 TO 65% SOLIDS).  THIS  PRODUCT WILL COVER IT IN ONE COAT = MINIMAL JOB.

 A NICE JOB WITH 100% SOLIDS IS  8 TO 16 MILS ..  ANY THICKER JUST KEEPS GETTING BETTER !!

  This product is a 2 to 1 mix..single gallon KITS  are not available .. but Tanker Cars and  TRUCK LOADS  can be arranged!!!

  !!! SALES TAX IS APPLIED TO ORDERS SHIPPED TO NEW YORK STATE !!!  

;            ;